How to replace wing mirror hinge
Installation Guides

How to replace wing mirror hinge

KIBOWEAR Technical TeamNovember 17, 2026

If your car's rearview mirror hinge breaks, it is necessary to replace it. Here are some guidance steps to help you complete the replacement of the rearview mirror hinge:

The primary task is to obtain a new rearview mirror hinge. You can go to an auto parts store or purchase it online, and make sure that the model and size of the selected product match the original.

Before starting the replacement, please prepare the necessary tools, including a screwdriver, a wrench, and new bolts or nuts for replacement (if the original ones are already damaged).

  1. Park the vehicle on a flat surface, turn off the engine and lock it to ensure safety. Afterwards, open the hood for further operations.

  2. The adjustment device for locating the rearview mirror, usually located below or on the side of the mirror. Adjust its position so that the fixing screws can be clearly seen, and be careful not to damage the screws during operation.

  3. Use a screwdriver to gently loosen the fixing screws, then carefully remove the rearview mirror, also being careful not to damage the screws.

After removing the rearview mirror, you will be able to access the mirror shaft. At this point, use a wrench to remove the old bolts or nuts and install new components. Please ensure that the new bolts or nuts are tightened properly to avoid damage to the shaft due to over tightening.

  1. Place the new rearview mirror in its original position and tighten the fixing screws with a screwdriver. Afterwards, please confirm that the mirror is securely installed on the rearview mirror hinge.

Finally, check if all steps have been completed properly, and then reinstall the engine hood. Start the vehicle and test the functionality of the rearview mirror. If everything is functioning as usual, then you have successfully completed the replacement of the rearview mirror hinge!

Related Articles