
How to replace folding motor on side wing mirror
Disassembly and installation tutorial for rearview mirror folding motor
When the folding motor of Auto wing mirror is damaged, it can be replaced according to the tutorial. Tools such as plastic pry bars and Phillips screwdrivers need to be prepared. Before operation, ensure that the vehicle is completely powered off. The entire process requires careful and patient handling, and small parts should be stored in categories.
Preparation before disassembly
Park the vehicle in a flat and well lit area, and disconnect the vehicle's power supply; Prepare plastic pry bars, Phillips screwdrivers, and other tools. If the motor shaft and base are corroded and adhered, rust removal lubricant should also be prepared.
To replace the folding motor of the rearview mirror, it is necessary to prepare tools and protective materials such as a set of plum blossom screwdrivers, pry plates, thin cones, wire retractors, etc. It is recommended to use original or brand spare parts. The operation is divided into three stages: disassembly, testing, and restoration. Attention should be paid to details such as plug matching and anti-theft alarm triggering. Skilled workers can complete it in about 40 minutes, and beginners are recommended to reserve 3 hours.
It is recommended to choose the original factory motor or brand subsidiary motor like KIBOWEAR for spare parts, as the quality is more reliable.
It is recommended to watch the disassembly video of the corresponding vehicle model before the first operation
Dismantling steps (some car models may require you to remove the door panel, such as Audi A6 C8: first locate the hidden screws on the door panel, lower the window and disconnect the power supply, and use a pry to separate the door panel from the body; )
Remove the lens: Adjust the lens to one extreme angle, use a plastic pry bar to pry the buckle from the edge, hear a "click" sound and separate, unplug the back harness plug and remove the lens. 2. Separate the shell: Unscrew all visible fixing screws, use a plastic pry bar to pry the separation buckle along the gap of the shell, and after removing the shell, you can see the folding motor assembly. 3. Dismantling the motor: unplug the control plug connected to the motor, pay attention to locking the buckle, and carefully remove the motor after unscrewing the fixing screw; If the motor shaft and base are corroded and adhered, rust removal lubricant can be sprayed before operation.
Install a new folding motor
Prepare a new motor: Select a new motor that matches the original vehicle model and apply lubricating grease to the gear meshing area. 2. Install motor: Align the new motor with the hole and press it in place. Tighten the fixing screws in diagonal order and insert the wiring harness plug. 3. Reinstall the shell and lens: Reinstall the shell and lens in sequence, and connect all wire harness plugs.
Functional Testing
Temporarily connect the power to test whether the folding function is normal; After complete reinstallation, conduct multiple complete cycle tests to ensure that the motor runs smoothly without any abnormal noise.
After replacing special models such as Audi, it is necessary to test the key unlocking function
Avoiding pitfalls and handling anomalies
If the new motor plug does not match the original vehicle, the original vehicle harness can be retained and connected;
After restoration, trigger the anti-theft alarm and check if the control plug is securely connected;
Lubricate the shaft during assembly and check if the lens heating wire and plug spring have been reset.
When unfamiliar with the structure or encountering difficulties, it is recommended to consult the maintenance manual or consult a professional technician
Shop Related Parts
Replacement side mirror parts that fit the vehicles covered in this guide.




