Why Wing Mirror's Automatic Folding does not work? 3 major error reasons+5-steps repair
Industry Knowledge

Why Wing Mirror's Automatic Folding does not work? 3 major error reasons+5-steps repair

KIBOWEAR Technical TeamNovember 17, 2026

01 Don't rush to replace the assembly yet, 60% of the faults can be fixed by yourself

The rear-view mirror does not fold automatically after locking. First, give the conclusion: More than 60% of the time, the settings are mistakenly closed or the system is occasionally stuck. Less than 40% of the time, the folding motor really needs to be replaced. According to the statistics fed back by many automotive technology communities and car owners, most of these failures can be solved through self inspection and simple operation. Going to the 4S store blindly to replace the assembly is likely to cost you money.

The models involved cover the vast majority of fuel vehicles and new energy vehicles equipped with electric folding rear-view mirrors on the market, ranging from 100000 family sedans to 300000 SUVs. The frequent failure scenarios are concentrated after the OTA upgrade, after the battery is powered off and restarted, in the cold winter morning, and after the remote key is replaced with a battery. The processing cost ranges from 0 yuan (change the setting by yourself) to 800-2000 yuan (replace the folding motor assembly). The key is whether you can accurately determine which dimension the fault belongs to.

🔧 60% non hardware failure⚙️ The most common setting error is closing❄️ It is easy to get stuck at low temperature in winter📱 Reset after OTA💰 Self inspection before repair

💡 Core conclusions: The locked rear-view mirror does not fold ≠ The rear-view mirror is broken. The first two dimensions account for the vast majority of the three dimensions of setup, electronics and machinery. Take 5 minutes to check yourself according to the steps in this article, and you can save at least 300 yuan of testing fees.

02Dimension 1: Settings and functions are not enabled (highest incidence, check here first)

This is the most easily ignored and solved problem. The vehicle central control screen or the vehicle engine system is equipped with an independent switch of "automatic folding rear-view mirror locking". Once it is closed by mistake, the rear-view mirror will naturally remain deployed when the vehicle is locked. After the first power on, maintenance, or OTA upgrade of some car models, this function will be automatically restored to the off state, and the owner needs to manually check it again.

The setting path of different models varies greatly. Taking mainstream models as an example, it is usually necessary to complete two steps: first rotate the rear-view mirror adjustment knob to the AUTO position, then enter the "Vehicle Settings" menu of the central control machine, and check the "Automatically fold the rear-view mirror after locking" option. Some models hide the switch in the submenu of "Door and Window Settings", while others are under the category of "External Lighting", which is difficult to find without looking at the owner's manual.

The car washer may have touched the settings by mistake just after you finished the maintenance, or the system has reset your personalization options after the OTA upgrade, and the rearview mirror does not move when you lock the car. Don't panic at this time. Open the owner's manual to find the rear-view mirror setting chapter, and take two minutes to reopen it. The personalization settings of some models will also be reset after the remote key battery is replaced or re paired , the folding function needs to be reset.

Set quick troubleshooting

  • Is the rear-view mirror adjustment knob in AUTO

  • Whether the folding switch in the central control "vehicle setting" is checked

  • Has the OTA been upgraded or the key battery replaced recently

  • Different models have different setup paths, and the owner's manual is the first reference

Tips for non winning points: If your car has just been serviced or upgraded, check the settings first and then the hardware. This step can solve most problems.

03Dimension 2: Sporadic electronic system stuck and motor protection logic

Occasionally, temporary software bugs appear in the vehicle's electronic system, causing the rearview mirror to fail to respond to the lock signal. This kind of fault usually disappears automatically after the next power off, power on or restart of the vehicle. Some car owners reported that after a normal driving or manual adjustment of the rear-view mirror angle, the folding function automatically returned to normal without any maintenance.

More commonly, the motor protection logic is triggered. Some models are equipped with protection mechanism: If the lock/unlock is triggered several times in a short time, the system will temporarily ignore the folding command to avoid overheating of the motor. If you have just turned on and off the lock several times in the parking lot, the rear-view mirror does not fold. In fact, the system is protecting itself. It is usually good to wait a few minutes and try again.

Another high incidence scenario is low temperature freezing. When the temperature is below zero in winter morning, the residual water in the rear-view mirror folding mechanism may freeze, increasing the mechanical resistance. The motor will stop protectively when it detects excessive resistance. This situation is very common in winter in northern China. It will naturally recover after the temperature rises or the vehicle is driven for a period of time, and no maintenance is required.

Fault phenomenon

Possible causes

Verification method

Handling method

There is no response when locking the rearview mirror

The setting is not turned on or the system is stuck

Check the central control settings; Power off and restart the whole vehicle

Re tick the setting or restart the vehicle

Single side folding, single side non folding

One side motor fault or gear stuck

Listen for the sound of motor running

One side assembly needs to be checked in the shop

Fold to half stop

Excessive mechanical resistance or foreign matter stuck

Observe whether the folding stroke is smooth

Clean foreign matters; Replace the gear if serious

Do not fold in the morning and recover at noon in winter

Resistance increases due to freezing at low temperature

Test after temperature rise

No maintenance, natural recovery

Sudden non folding after frequent locking

Motor overheat protection trigger

Wait 5-10 minutes and try again

Just wait for the protection to be lifted

Data source: comprehensive owner feedback and maintenance case statistics of multiple automobile technology communities

04Dimension 3: Physical external factors and mechanical failures

If the first two dimensions are excluded, you need to check the physical level. The rear-view mirror is slightly impacted or scratched by external objects, which may cause the internal gear and motor to be stuck or misaligned, and the folding travel cannot be completed. Sand, ice slag or foreign matter entering into the folding mechanism will also increase the mechanical resistance and make the motor protective stop.

The typical feature of this kind of fault is that the motor running sound can be heard when folding, but the rear-view mirror does not move, or it is stuck when folding half. If only one side has problems, it can be basically judged that the mechanical structure on that side is damaged. This situation really needs to be repaired in the shop, but it is not necessary to replace the assembly. Sometimes it can be solved by cleaning foreign matters or replacing a single gear.

Tips for non decisive points: the folding failure caused by physical damage accounts for a relatively low proportion, but if you have recently scratched or parked near the construction road section, this item should be checked first.

05 Five step self-help guide: from 0$ to entering the store, check level by level

one

Check settings : Enter the "vehicle setting" of the central control machine, and confirm that "automatic folding rear-view mirror after locking" has been checked, and the rear-view mirror knob is in AUTO position

two

Restart the system : Get off the whole vehicle and wait for 5 minutes before powering on again, so that the electronic system can complete a complete restart

three

Manual cycle : Press the inside fold button once to let the rear-view mirror complete a retraction and retraction cycle. If OTA upgrade has been done recently, this step can restore the function

four

Check for foreign matters : Observe whether there is sand, stone or ice slag in the folding gap of the rearview mirror, clean it with a soft cloth and test again

five

In store diagnosis : The above four steps are invalid, and it is confirmed that there is a unilateral fault or abnormal noise, then go to the 4S store or repair shop to check the motor and gear

Viewpoint PK:

65%: Self inspection before repair

35%: Directly entering the store is worry free

Self-examination faction(65% support)

  • 60% of the failures are setup or system problems, and do it yourself at zero cost

  • The problem can be located in 5 minutes after troubleshooting according to the 5-step process

  • Avoid being fooled by defective repair shops to replace the assembly

P K

Worry free school (35% support)

  • Don't want to bother, go directly to the 4S store for inspection, which saves time

  • Worried about secondary damage caused by improper operation

  • The vehicle is still within the warranty period, so it is safer to handle the problem when entering the store

06 Suggestions on handling by groups

New car owners (within 3 years)-0$ self inspection priority

The probability is that OTA is upgraded or set to close by mistake. Follow the first three steps of the five step guide, and 90% of the problems can be solved. Free replacement for hardware problems during the warranty period

Old car owners (more than 5 years)-Focus on machinery

The probability of gear wear and motor aging increases. If it still does not fold after cleaning the foreign matter, it is recommended to check the one-sided assembly in the shop. The maintenance cost is about 300-800 yuan

Users in high latitude regions -Waiting for natural recovery

Low temperature freezing is a common phenomenon, and it will automatically recover after the temperature rises. If it occurs frequently, consider manually folding the rear-view mirror when parking

Just finished maintenance/upgrade-Check settings first

Resetting the settings after maintenance is a high risk problem. Open the owner's manual, find the folding switch and check it again. There is no need to enter the store

07 FAQs

Q1: The locked rear-view mirror does not fold, but it can unfold normally when opening the door. What is the problem?

Probably it is a setting problem or the system occasionally gets stuck. First, check whether the "automatic folding after locking" in the central control screen is closed, and then restart the whole vehicle after powering down. If it is still invalid, press the folding key in the car once to complete the retraction and retraction cycle, and it can be recovered in most cases.

Q2: The OTA upgraded rear-view mirror does not fold automatically. How can I restore it?

Personalization settings may be reset after the upgrade. Enter the vehicle machine "vehicle setting" and check the folding option again, then manually press the folding key once to complete the retraction and retraction cycle. For some models, the rear-view mirror knob must be turned to AUTO to take effect.

Q3: Only the left rearview mirror does not fold. The right mirror is normal. Is it broken?

One side fault can basically eliminate the setting problem, and focus on checking whether there is foreign matter stuck in the folding mechanism at this side or the gear is misaligned. If it still does not act after cleaning, it may be that the motor at this side is faulty, so it is necessary to check the unilateral assembly in the shop, and the maintenance cost is usually 100US$-200US$.

Related Articles